Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Electrician Trade Test Theory in Drawings: Read the Drawing, Size the Cable and Find the Fault in the Same Order Every Time One Topic on Every Page

Safe isolation, Ohm's law, the symbols on a drawing, cable sizing, DBs, earth leakage, earthing, motor starters and fault finding. Every topic has its own page: the drawing first, then what you need to remember. 66 illustrated pages.

START STUDYING THIS WAY

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach procedure drawn step by step, with the explanation alongside
66 illustrated pages9 parts, from safe isolation to the final checklist for the trade test
Up-to-date sourcesSANS 10142-1, the OHS Act 85 of 1993 and the Electrical Installation Regulations, 2009
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the values, rules and steps you need to know:

Trade test: several days at an accredited centre, eight parts in the order of the job
Trade test: several days at an accredited centre, eight parts in the order of the job
P = V × I · 2 kW on 230 V ≈ 8.7 A · 2 kW × 3 h = 6 kWh
P = V × I · 2 kW on 230 V ≈ 8.7 A · 2 kW × 3 h = 6 kWh
Socket outlets: earth leakage IΔn ≤ 30 mA, dedicated outlets the only exception
Socket outlets: earth leakage IΔn ≤ 30 mA, dedicated outlets the only exception
Cable size = current capacity + breaker protection + voltage drop: the biggest result wins.
Cable size = current capacity + breaker protection + voltage drop: the biggest result wins.
Bonding continuity: 4–24 V test supply, at least 0.2 A, no more than 0.2 Ω.
Bonding continuity: 4–24 V test supply, at least 0.2 A, no more than 0.2 Ω.
Supply → isolator → fuses or breaker → contactor → overload → motor.
Supply → isolator → fuses or breaker → contactor → overload → motor.
Four stops before testing: DB labels, cable sizes, 30 mA on sockets, bonding in place.
Four stops before testing: DB labels, cable sizes, 30 mA on sockets, bonding in place.
Ask, look, isolate, split, fix, retest: one fault-finding method for every job
Ask, look, isolate, split, fix, retest: one fault-finding method for every job

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 9 parts and 62 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're looking at the drawing of an installation and the assessor asks you to wire it. You've done this job a hundred times, but on paper you're stuck: which circle is the lamp, which box is the isolator?

Your notes describe the symbols in paragraphs: "the two-way switch is represented by…". Words describing a picture don't stay in your head, especially at night after a full day on site.

Socket outlets: earth leakage IΔn ≤ 30 mA, dedicated outlets the only exception

In this book the symbols sit together on one page: 11 symbols side by side, from the switch to the overload, each drawn big with its name underneath. You see the mark and the name together, exactly as they appear on a drawing.

Ohm's law, conductor colours, two-way switching, the DOL control circuit and the testing sequence work the same way: each one has its own page.

You read the drawing, you know what every mark means and you wire it without going back to the manual.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: lines and lines of text
  • Voltage, current and resistance explained only in words
  • You walk into the trade test with doubts
Electric current (I), measured in amperes, is defined as the rate of flow of electric charge through a conductor, one ampere corresponding to one coulomb of charge passing a given point per second. The potential difference (V), measured in volts, is the work done per unit charge in moving that charge between two points in a circuit, whereas resistance (R), measured in ohms, is the property of a material which opposes the flow of current and depends upon its resistivity, length, cross-sectional area and temperature.
FOR THIS
  • Voltage, current and resistance in one water-pipe drawing
  • The SA supply values in a box: 230 V, 400 V, 50 Hz
  • You see it and you get it
P = V × I · 2 kW on 230 V ≈ 8.7 A · 2 kW × 3 h = 6 kWh
CONTENTS

Take a Look at the 9 Parts and 62 Topics

Safety first, electrical principles, circuits and diagrams, cables and DBs, earthing and earth leakage, motors and control, inspection and testing, fault finding and revision: 66 pages, all illustrated

ISafety first · pp. 5-11
  1. How the trade test works and how to use this book
  2. The law behind your work: OHS Act and the Installation Regulations
  3. What current does to the body
  4. Safe isolation in 6 steps
  5. Lock-out and tag-out
  6. Your tester and your PPE
  7. Fire, burns and first response
IIElectrical principles · pp. 12-20
  1. Voltage, current and resistance: the water pipe picture
  2. Ohm's law with the triangle
  3. Power and energy
  4. Resistors in series
  5. Resistors in parallel
  6. Series-parallel step by step
  7. AC basics: the sine wave
  8. Inductance, capacitance and power factor
  9. Three-phase: star and delta
IIICircuits, symbols and diagrams · pp. 21-27
  1. The symbols you must read on a drawing
  2. Conductor colours
  3. One-way switching
  4. Two-way and intermediate switching
  5. Socket outlet circuits
  6. Reading a single-line diagram
  7. From drawing to wiring diagram
IVCables, protection and DBs · pp. 28-35
  1. Choosing a cable size
  2. Voltage drop
  3. Fuses and circuit breakers
  4. Overload versus short circuit
  5. The distribution board, layout
  6. Wiring a DB in order
  7. Discrimination (selectivity)
  8. Cable installation methods
VEarthing, bonding and earth leakage · pp. 36-42
  1. Why we earth
  2. Earthing systems: TN-C-S and TT
  3. The earth electrode and main earth terminal
  4. Bonding metal parts
  5. How an earth leakage unit works
  6. The earth leakage test button
  7. Nuisance tripping: what causes it
VIMotors and control · pp. 43-49
  1. How a three-phase induction motor turns
  2. Reading a motor nameplate
  3. Star and delta links in the terminal box
  4. The DOL starter, power circuit
  5. The DOL starter, control circuit
  6. Star-delta starting
  7. Forward-reverse with interlocking
VIIInspection and testing · pp. 50-57
  1. Inspection before testing
  2. The testing sequence
  3. Earth continuity test
  4. Insulation resistance test
  5. Polarity test
  6. Earth loop impedance and earth electrode resistance
  7. Testing the earth leakage unit
  8. The Certificate of Compliance
VIIIFault finding · pp. 58-62
  1. Fault finding in 6 steps
  2. The split-half method
  3. Open circuit, short circuit, earth fault
  4. Faults in a motor circuit
  5. Earth leakage trips: finding the circuit
IXRevision before the trade test · pp. 63-66
  1. The sequences to know by heart
  2. Formulas on one page
  3. Explaining why to the assessor
  4. Final checklist for the day

One Page, One Topic, All Clear

Think of it this way:

It's the night before your trade test and you're going over earthing: why does the metal case of a kettle have to be earthed?

You open the page on why we earth and see the kettle with a live-to-case fault: with an earth the breaker trips, without one the case stays live. Next day, when the assessor asks, you see that drawing.

Bonding continuity: 4–24 V test supply, at least 0.2 A, no more than 0.2 Ω.

The same goes for safe isolation, Ohm's law, choosing a cable size, the induction motor and fault finding in 6 steps: each one on its own page.

Electrician Trade Test Illustrated is 66 illustrated pages in 9 parts, and it ends with the sequences to know by heart, the formulas on one page and a checklist for the day.

What you see drawn, you don't have to memorize.

What's Inside Electrician Trade Test Illustrated:

Ipp. 5-11

Safety first

How the trade test works, the OHS Act and the Installation Regulations, what current does to the body, safe isolation in 6 steps, lock-out, your tester and PPE, fire and burns.

IIpp. 12-20

Electrical principles

Voltage, current and resistance as a water pipe, Ohm's law with the triangle, power, series and parallel step by step, AC, power factor and three-phase star and delta.

IIIpp. 21-27

Circuits, symbols and diagrams

The symbols on a drawing, conductor colours, one-way, two-way and intermediate switching, socket circuits, single-line diagrams and turning a drawing into wiring.

IVpp. 28-35

Cables, protection and DBs

Choosing a cable size, voltage drop, fuses and breakers, overload versus short circuit, the DB layout and wiring it in order, discrimination and installation methods.

Vpp. 36-42

Earthing, bonding and earth leakage

Why we earth, TN-C-S and TT, the earth electrode and main earth terminal, bonding, how an earth leakage unit works, the test button and nuisance tripping.

VIpp. 43-49

Motors and control

How an induction motor turns, the nameplate, star and delta links, the DOL starter power and control circuits, star-delta starting and forward-reverse with interlocking.

VIIpp. 50-57

Inspection and testing

Inspection before testing, the testing sequence, continuity, insulation resistance, polarity, earth loop impedance and electrode resistance, the earth leakage test and the Certificate of Compliance.

VIIIpp. 58-62

Fault finding

Fault finding in 6 steps, the split-half method, open circuit, short circuit and earth fault, motor circuit faults and tracing an earth leakage trip.

IXpp. 63-66

Revision before the trade test

The sequences to know by heart, the formulas on one page, how to explain the why to the assessor and a checklist for the day.

At the end of the book: The sequences to know by heart, the formulas on one page and a final checklist for the day.

Plus: 2 Free Books

Trade Test Theory Questions: Exam-Style Practice with Worked Answers

BONUS 1: «Trade Test Theory Questions: Exam-Style Practice with Worked Answers»

Value on its own: US$ 17.90

Practise the questions most often asked on safety, Ohm's law, circuits, earthing and testing, and see the worked answer step by step so you know exactly where you went wrong.

The 15 Most Common Electrician Mistakes: Before and After

BONUS 2: «The 15 Most Common Electrician Mistakes: Before and After»

Value on its own: US$ 14.90

Revise the mistakes that come up most often on site and in assessment, each one drawn wrong and then right, so you spot them at a glance.

Electrician Trade Test Illustrated with 2 Free Books

  • Electrician Trade Test Illustrated: 66 illustrated pagesUS$ 63
  • BONUS 1: Trade Test Theory Questions: Exam-Style Practice with Worked AnswersUS$ 17.90
  • BONUS 2: The 15 Most Common Electrician Mistakes: Before and AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT ELECTRICIAN TRADE TEST ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Electrician Trade Test Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're finishing your apprenticeship

You're finishing your apprenticeship

The theory from college in one drawing per topic, in the same order you do the job, so it finally joins up with what you do on site.

Your trade test date is set

Your trade test date is set

Every sequence numbered and every formula on one page, to revise at night and walk into the centre knowing where everything is.

You've worked as an electrician for years

You've worked as an electrician for years

No beginner talk: the theory behind what your hands already do, drawn, so you can explain the why to the assessor.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT ELECTRICIAN TRADE TEST ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Electrician Trade Test Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've worked as an electrician for years without my trade certificate?

Yes. It doesn't explain what a screwdriver is: it draws the theory behind the work you already do, for the trade test by recognition of prior learning or at the end of an apprenticeship.

Where does the content come from?

Each topic is written and checked against SANS 10142-1, the OHS Act 85 of 1993 and the Electrical Installation Regulations, 2009. It's written for South Africa: 230 V / 400 V at 50 Hz, our conductor colours, our DBs and the Certificate of Compliance. Where a value can change between editions, the page says so, so you can confirm it in your copy.

Is this official material?

No. It's independent study material, not affiliated with or endorsed by SABS, the Department of Employment and Labour, QCTO, NAMB, any trade test centre or any SETA.

Does it replace my training or apprenticeship?

No, and it doesn't give you a certificate or count towards your trade test. It helps you revise and understand the theory behind it. Your training, your practical work and your accredited centre still come first.

Are the practice questions the ones on the trade test?

No. They're exam-style questions written for this book, with worked answers. They aren't official questions from any exam.

When and how does it arrive?

The book and the 2 free books arrive as PDFs by email, at the address you enter at checkout. Payment is processed securely by Stripe. If you can't find the email, check your spam folder; if it never arrived, write to us and we'll refund you in full.

Do I have to pay every month?

No. It's a one-off payment.

Can I have it on paper?

Yes. The PDFs print on A4 at home or at a print shop, so you can keep them in your toolbox or on your desk.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading notes that don't stick.

The symbols on a drawing: each one drawn, with its name underneath.

You walk into the trade test knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT ELECTRICIAN TRADE TEST ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.